Ladder Mesh Reinforcement

Ladder Mesh Reinforcement’s cross rods are spaced so block cells are not obstructed, allowing easy placement of vertical rebars

  • A full 8″ splice between lengths of ladder is facilitated
  • Hohmann & Barnard’s Lox All® Truss-Mesh and Lox All® Ladder-Mesh are continuous lengths of joint reinforcement that are embedded into the horizontal mortar joints of masonry walls
  • Joint reinforcement has long proven to be necessary for superior performance of masonry wall construction

Benefits

  • Greatly reduces cracking that can arise from thermal
    stresses. This enhances resistance to water penetration,
    as cracks are controlled.
  • Increases lateral flexural strength.
  • Bonds exterior and interior masonry wythes together in             composite or cavity walls. Also bonds masonry at
    intersecting walls and corners
  • Increases elasticity and performance of masonry walls
    under various stresses

Features

  • Butt-welding of cross rods to longitudinal rods
    (not more than 16”o.c.). This construction enhances
    bonding capabilities, eliminates projection of cross
    rods beyond the specified width of reinforcement, and prevents excessive build up of wire in limited mortar joints
  • Continuous deformation along each longitudinal rod for superior bonding performance

Truss Mesh Reinforcement

Truss-Mesh is a truss type continuous length joint reinforcement for single wythe walls.

  • Hohmann & Barnard’s Lox All® Truss-Mesh and Lox All® Ladder-Mesh are continuous lengths of joint reinforcement that are embedded into the horizontal mortar joints of masonry walls 
  • Joint reinforcement has long proven to be necessary for superior performance of masonry wall construction.

Sizes

  • Reinforcing can be STANDARD WEIGHT (9 ga x 9 ga), EXTRA HEAVY (3/16″ Side Rods x 9 ga Cross Rods) or SUPER HEAVY DUTY (all 3/16″)
Benefits
  • Reinforces a variety of masonry walls
  • ◦Greatly reduces cracking that can arise from thermal stresses
  • Enhances resistance to water penetration, as cracks are
    controlled
  • Increases lateral flexural strength
  • Bonds exterior and interior masonry wythes together in
    composite walls 
  • Bonds masonry at intersecting walls and corners
  • Increases elasticity
  • Increases performance of masonry walls under various stresses
  • Fabricated in conformance with ASCE/ACI 530 building code
    requirements for masonry structures, and ASTM A 951 (standard
    specification for masonry joint reinforcement) 


For more information on these and other
Hohmann & Barnard, Inc. products 
contact
your local
Williams dealer.


Visit the Hohmann & Barnard Website




Contact Us